110x20 Front Hub
Go Fast. Stop Fast.
We increased the thickness of the 110x20 Front Hub brake rotor mount for increased durability and to accommodate extra-large front rotors that come with DH racing and riding.
Direct Mount Design.
Utilizing an oversized bearing layout, the fork axle directly interfaces with the bearings, allows us to deliver the most possible stiffness at the lowest possible weight.
Easier Lacing.
Updated flange drillings make wheelbuilding easier than ever, with inboard and outboard spokes both passing through freely, unobstructed by rotor mounts.
FAQ
How long is the warranty period on this product? What does it cover?
OneUp Hubs have a 2-year warranty on all components, excluding bearing wear.
How regularly should I service my Hubs?
Hub service intervals vary depending on your riding frequency and the climate. To check if your hubs need servicing, remove the wheel and spin it in your hands by holding the end caps. If it feels or sounds rough and notchy, it's likely time for a service. Alternatively, you can check how your bearings spin by removing the end caps or freehub and feeling them with your finger.
Where are & how do I read the hub dimensions to measure spoke length?
The Hub dimensions are on the product pages and lasered onto the center of the hubs.
PCD stands for Pitch Circle Diameter and refers to the distance between opposing spoke holes on the hub flanges (from the center of the hole).
Flange Dist refers to the distance from the center of the flange to the center point of the hub.
L stands for Left & R stands for right.
These four measurements, along with your hub spacing (110 or 148mm) and the ERD of your rim is all you need to measure spoke length. Please use your preferred spoke calculator to complete the measurement!
