Best Pump!
"This instantly became my favorite pump, I've had quite a few. It has great pumping feel, easy to put onto the valve, can operate a CO2, and holds my tools!"
70cc EDC Pump
A Mobile Toolbox.
The 70cc EDC Pump’s hollow body is designed to store the 20-function EDC V2 Tool and Plug Kit inside. With the EDC Pump you’ll have all the tools all the time.
Super Compact & Ultralight.
At 70cc and 135g, the EDC Pump is an easy way to be prepared on any ride. Toss it in your pack or mount it to your bike. You’ll forget about it until you need it.
Easy-On Pump Head.
Push it on, pump it up, pull it off. Our pump head supports the valve stem to avoid bending, breaking or unseating the valve. Plus, no threading means no chance of unscrewing your valve core when you remove the pump.
FAQ
Will the pump work with my Clik valves?
The pump has a standard Presta head, which does allow the pump to work with a Clik valve. However, based on rider feedback, we're aware that the pump can feel quite stiff during use.
I got the multi tool and pump, why does the tool rattle in the pump?
The multi tool is just one part of a whole. It is designed to be held captive within the EDC tool system. That complete tool can then be inserted into the pump and everything will be held nice, quiet and compact. Here is a link to the complete EDC tool system.
Do you sell replacement pump straps?
Yes! We have three packs of pump mount straps available in the EDC small parts section of the website.
Why is the tool hard to remove form my pump?
It is likely that the top O-ring is dry. Best thing to do is rub a small amount of grease onto the o-ring and re-install it. If that does not help, please email us at support@oneupcomponents.com.
What is the max the pump mount can be spaced from the bolt? WIll this fit my Wide down tube?
The pump mount has a max extension of 30mm from the center of the mounting bolts.
My pump handle is extending while riding, what can I do?
First make sure the handle seal is fully seated onto the handle. Then make sure you are running the pump with the pointed handle up. If it continue to extend, please email us at support@oneupcomponents.com and we can help!
Where is and how do I remove the CO2 inflator head from the pump?
The inflator head of the pump (the anodized green part) doubles as a CO2 inflator head, simply unthread it from the pump and you can thread your CO2 right onto it.
It can be quite snug from assembly, the first removal may require you use an 8mm hex key to unthread it.
Is this pump compatible with both Presta and Shraeder valves?
This pump is only compatible with Presta valves.
What is the max PSI for these pumps?
This pump is designed for MTB and gravel applications. It will happily get to 50-60PSI. Any pressure beyond that is not practical and we do not recommended this pump for high pressure road applications.
The pump doesn't seem to fit my valve, whats going on?
The pump head fits quite snugly on the valves when new. Be sure you give it a firm & straight push down onto the valve before inflating.
Reviews
Overall rating: 4.8501945 / 5 from 514 reviews.
AI Generated Review Summary
The 70cc EDC Pump is praised for its compact design, high-volume capacity, and excellent performance. Customers appreciate its lightweight construction, ease of use, and the quality of the included tool. The product is also noted for its useful storage and well-made finish.
Summary topics
- Customer Service: 3%
- Product Fit: 5%
- Pump Performance: 45%
- Tool Quality: 17%
- Product Design: 9%
Review topics: ["fit","size","model","issues","strap","weight","quality","function","material","looks","design","post","feel","package","construction","works","finish","volume","customer service","support","pressure","air","build","service","equipment","metal","grip","pump","tool","kit"].
Review highlights
- "Pump works really well and to have your multi tool stored away in it is awesome." —
- "High Quality Pump & Tool" —
- "Good quality, useful tool, cool design." —
Reviews
Pompe
"Très bonne pompe"
Good pump but could use some improvements.
"I really like the pump overall. The good: - Lightweight and easy to mount - Optional inline mount or bottle cage mount options. I've used both. The bad: - The rubber presta valve plug that plugs into the actuator is so tight, it sometimes won't plug in (or stay in). The issue I have run into, is that this will explode the green pump inflator assembly to water and dirt. After a while, this will start to corrode the internal parts of the assembly and will prevent the assembly from allowing air to go through, rendering it useless. I've tried to soak it in WD40 to try to free it up, but ended up having to order a new assembly. - I've broken the bottle cage mount twice now, after a couple crashes. The issue is, the pump sticks out the side of the frame and makes is more susceptible to crashes. I recently switched to the in-line mount to see if that is a better solution. - The rubber strap breaks easily. I've broken 2. My friend broke 2 or 3, to the point he just gave up replacing them - Suggestion: It'd be cool if the pump inflator assembly came in optional colours."
The best! Super compact and
"The best! Super compact and very well made."
Buy it!
"Super light and IMO it's a gear you need to have while out riding. I added a CO2 cartridge in the storage compartment."
Love it but
"I love it but, i wish you could flip the rubber insert and use it on a schrader as well."
A great little tool/pump combination
"A great little tool/pump combination"
Love it so far. I
"Love it so far. I bought the pump, the V2 tool, and the plug and pliers kit. Have not had to use the pump but have used the V2 tool for a quick adjustment. The 100cc EDC pump allows me to go without a pack on shorter rides but gives me the confidence that I can deal with most mechanical issues on the fly. I also bought a spare pump holder so my son can grap the pump for his rides if I am hot along. The EDC system is very well thought out and user friendly. Have already convinces several of my riding buddies to get one too>"
Just what I needed, it
"Just what I needed, it was shipped right away. That plus the quality of product is unmatched. Thanks!"
Great product
"Great product"
Q&A
- Can I put an EDC tool on my SR Suntour XCM32
- Hi Kiwi, Thanks for your message, I'm happy to help. Unfortunately none of our EDC steerer tube carriers will fit your fork. I'd instead suggest taking a look at our EDC Pumps, as you can store the V2 EDC Tool in them, and mount them to the water bottle cages on your bike. Hope this helps, please let me know if there's anything else I can do for you. Cheers, Tom
- Hello there, This is more of a shipping questions than a product question. Do you ship to Kenya? I'm looking into buying the 100cc EDC pump with all the tools and mounting hardware. Warm regards, Lumbi.
- Hi Lumbi! We ship to Kenya, but you'll be responsible for import charges and duties. Let me know if I can help with anything else.
- Hello, I'm interested in the 100cc EDC Pump Bundle. It shows 172 USD as a Set, but in Cart it is 192 USD. How can I get the 10% off as described? Thanks, Martin
- Hey Martin, sorry to hear your are having troubles getting that pump bundle pricing to apply here. Could you please send me a screenshot of the cart you are seeing? I am wondering if it's calculated tax for you already.
- can I make this work with schrader?
- Hey Marco, this pump does not work with a Schrader valve
- Anyone know if the 100cc pump will fit through the swat box door on a specialized stumpjumper?
- yes it does.
