Grip Install Instructions
Things You Will Need
- 3mm hex tool
- Mallet
- Cleaner & cloth
Assembly time, approximately 5-10 minutes. Difficulty: Easy.
SPECS
Weight: 97g (Pair)
Length: 136mm
Diameter: 30mm
Colours: Black, Red, Green, Blue, Orange, Turquoise, & Purple
INSTRUCTIONS
STEP 1:
Remove your gross, sticky, gooey, sicko old grips. Clean scruzz off of bar.
STEP 2:
Slide on your fresh new One Up Grips. Be sure you get the right sides. Each Grip has an R & L denotation on the outer flange.
STEP 3:
Lightly tap the end with a mallet to ensure the grip presses completely onto the bar.
STEP 4:
Torque lockring bolt to 4Nm. Test the grip to make sure it does not spin under twisting force. If so tighten until spinning ceases.
Booooom, Yer good to go.
