Underbash Install Instructions

Things You Will Need

  • 4mm hex tool
  • 5mm hex tool

Assembly time, approximately 10-15 minutes. Difficulty: Easy.

STEP 1:

Hold backplate directly against ISCG05 tabs. Check for clearance between the back side of the bashplate and the bike frame (use included 2.5mm spacers if necessary to space the backplate away from the frame).

STEP 2:

Rotate backplate to desired location and torque bolts to 5Nm

BASH REPLACEMENT INSTRUCTIONS

STEP 1:

Remove Underbash from bike

STEP 2:

Remove bolt retaining clip from rear bash plate bolt by pushing a 4mm hex through the bolt from the backside of the Underbash.

STEP 3:

Remove Bash bolts using a 5mm hex

STEP 4:

Select desired bash plate and reinstall bash bolts to 6Nm

STEP 5:

Reinstall bolt retaining clip on the rear bash plate bolt

STEP 6:

Reinstall Underbash onto bike